Pacifica V6-3.8L VIN L (2005)
![background image](/chrysler/pacifica/v6-3.8l_vin_l/Page-1943001.png)
Speaker: Service and Repair
Rear Door Speaker
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the rear door trim panel.
3. Remove the mounting fasteners.
Rear Door Speaker
4. Disconnect the electrical harness connector and remove speaker.
INSTALLATION
1. Connect electrical harness connector and position speaker to door.
2. Install mounting fasteners. Tighten to 3 N.m (28 in. lbs.).
3. Install rear door trim panel.
4. Connect battery negative cable.