Pacifica V6-3.8L VIN L (2005)
![background image](/chrysler/pacifica/v6-3.8l_vin_l/Page-2151010.png)
Fig. 10
4. Remove upper trim panel from liftgate, if equipped with power liftgate (Fig. 10). Refer Trunk/Liftgate Moulding/Trim.
5. Disconnect power liftgate link from ball head bracket, if equipped.
Fig. 11
6. Remove two screw attaching upper D-pillar (Fig. 11).
7. Disengage locking tabs attaching trim to D-pillar.
8. Remove D-pillar trim panel from D-pillar.
9. Pass seat belt through slot in D-pillar trim panel.
10. Remove D-pillar trim from vehicle.