Pacifica V6-3.8L VIN L (2005)
4. Remove second and third row lower seat belt anchor bolt covers and lower seat belt anchor bolts from the lower quarter trim panel at the C and
D-pillars.
5. Remove lower quarter trim panel.
6. Remove the upper D-pillar trim.
7. Remove the two B-pillar seat belt retaining ring mounting screws and then retaining ring from seat belt webbing.
8. Remove the two seat belt retractor mounting bolts.
Seat Belt & Retractor - 3rd Row - Upper - Remove/Install
9. Remove the turning loop cover and bolt from D-pillar.
10. Remove seat belt and retractor from vehicle.
INSTALLATION
1. Position seat belt and retractor in vehicle.
2. Install the turning loop retaining bolt in the D-pillar. Torque bolt to 40 N.m (30 ft. lbs.) and install seat belt turning loop cover.
3. Install the two seat belt retractor mounting bolts. Torque bolts to 40 N.m (30 ft. lbs.).
4. Install the B-pillar seat belt retaining ring onto the seat belt webbing and then the retaining ring screws to the D-pillar.
5. Install the upper D-pillar trim.
6. Install the lower quarter trim panel.
7. Install the second and third row lower seat belt anchor bolts and covers to the lower quarter trim panel at the C and D-pillars.
8. Install the second and third row seats to the side of vehicle that the seat belt and retractor are being serviced.
9. Connect the battery negative cable.
10. Verify vehicle and system operation.
11. Close hood.