Pacifica V6-3.8L VIN L (2005)
Fig. 80
NOTE: If proper location marks are unavailable or as a check, the crossmember can be positioned utilizing the PLP points. Shift the
crossmember as necessary to achieve the measured distances shown in the figure (Fig. 80).
22. Once mounts are lined up with location marks, tighten all four crossmember mounting bolts to 163 N.m (120 ft.lbs.) torque.
23. Tighten shock absorber lower mounting bolts to 102 N.m (75 ft.lbs.) torque.
24. Remove jack from under crossmember.
25. If equipped with AWD, install rear driveline module and both rear half shafts.