Pacifica V6-3.8L VIN L (2005)
11. Place Guide 905OA-2 against sleeve in knuckle as shown (Fig. 10).
12. Insert Tap 905OA-1, on an appropriate handle, through Guide and into sleeve (Fig. 10). Cut threads approximately halfway through bushing (or
about six complete threads). It is important to back Tap out often and clean out burrs that can build up inside Guide. Keep Tap well lubricated to
avoid damaging it.
NOTE: Prior to using Remover, Special Tool 9050A, lubricate Bolt threads to provide ease of use and promote tool longevity.
13. Assemble Remover 9050A as shown (Fig. 11).
NOTE: When installing thrust bearing on Remover, be sure to place hardened side toward nut.