Pacifica V6-3.8L VIN L (2005)
![background image](/chrysler/pacifica/v6-3.8l_vin_l/Page-1556004.png)
14. Remove sleeve retaining spring link ball joint in knuckle as follows (Fig. 12):
a. Hand thread assembled Remover 9050A into tapped knuckle sleeve until it stops.
b. Rotate Nut down, matching Sleeve 905OA-5 angled end with angled face of knuckle.
c. Continue to rotate Nut until knuckle sleeve is removed from knuckle. Discard knuckle sleeve; replace it with new upon installation.
15. Remove bolt and nut fastening compression link to knuckle (Fig. 19).