PT Cruiser L4-2.4L (2008)
WITH MANUAL TRANSAXLE
NOTE: Before proceeding, See: Service Precautions/Brakes - Warning.
1. Unclip the air cleaner cover (two clips) and move the cover aside.
2. Disconnect and isolate the battery negative cable (1) from its post on the battery (4).
3. Remove the silencer pad below the knee blocker.
4. Fold down and remove the knee blocker.
5. Remove the stop lamp switch (1) by rotating the switch counterclockwise approximately 30 degrees, then pulling it rearward out of the bracket.
Disconnect the wiring harness connector and discard the switch. Do not reuse the stop lamp switch.