PT Cruiser L4-2.4L (2008)
CAUTION: Extreme caution should be taken not to cross-thread the caliper guide pin bolts (4) when they are installed.
5. Carefully install the caliper guide pin bolts (4). Tighten the bolts to 22 Nm (192 in. lbs.).
6. Install the tire and wheel assembly (1) See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels -
Installation. Tighten the wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
7. Adjust the parking brake shoes as necessary. See: Parking Brake System/Parking Brake Shoe/Adjustments
8. Lower the vehicle.
9. Pump the brake pedal several times before moving the vehicle to set the pads to the brake rotor.
10. Check and adjust the brake fluid level in the reservoir as necessary.
11. Road test the vehicle and make several stops to seat the brake pads to the rotor.
