Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
9. For vehicles with the DOHC engine, remove the throttle body.
10. Remove the fuel rail mounting bolts.
NOTE: Take extreme care not to damage the fuel injector O-rings to prevent fuel leaks when the fuel rail is reseated.
11. Unseat the fuel rails from the cylinder head, and slightly push the fuel rail assembly clear of the cylinder head in the direction of the master
cylinder.
12. Remove the nut and the washers which hold the generator lower bracket-to-generator bolt.
13. Carefully remove the generator.
Installation Procedure
1. Install the generator at the generator lower bracket and insert the generator bolts.
2. Install the nuts and the washers on the generator lower bracket-to-generator bolts.
Tighten
Tighten the generator lower bracket-to-generator nuts to 20 Nm (15 lb.ft).