daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

Alternator|Removal and Installation|Page 3280 > < Alternator|Removal and Installation|Page 3278
Page 4
background image

3. Install the serpentine accessory drive belt on vehicles not equipped with power steering and air conditioning.
4. Secure the generator to the shackle bracket with the bolt (SOHC engine is shown). For vehicles equipped with power steering and air conditioning.

Tighten
Tighten the generator shackle bracket bolt to 20 Nm (15 lb.ft).

5. Connect the harness connector to the back of the generator.
6. Install the generator lead to the battery and fasten the lead with the nut.

Tighten
Tighten the generator battery lead nut to 15 Nm (11 lb.ft).

7. Lubricate the injector O-rings on the DOHC engine with engine oil.
8. Install the fuel rail assembly.

Tighten
Tighten the fuel rail retaining bolts to 20 Nm (15 lb.ft).

9. Install the throttle body.

Alternator|Removal and Installation|Page 3280 > < Alternator|Removal and Installation|Page 3278