Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
8. Lubricate the gears with lubricant and install the driveshaft assembly with the bushing and the washer on the gear end.
9. Install the cushion and the gears.
10. Lubricate the drive end of the armature shaft with lubricant and install the new gear and the bearing, if necessary.
11. Position the solenoid assembly and the return spring against the plunger, applying sealer to the solenoid flange.
12. Fasten the solenoid assembly with the screws.
Tighten
Tighten the starter solenoid assembly screws to 8 Nm (71 lb.in).
