Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
16. Pry off the baffle.
17. Remove the rectifier/regulator/brush holder assembly screws.
18. Remove the brush holder assembly and the regulator, cutting the terminal between the regulator and the rectifier bridge.
IMPORTANT: If the brush can be reused, reassemble the brush to the holder with the retaining pin, after cleaning the brush with a soft, clean
cloth.
19. Test the rectifier bridge by connecting the ohmmeter terminals to the bridge and the heat sink.
20. Retest by connecting the ohmmeter terminals in the reverse order.