Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
4. Tighten the knuckle-to-strut assembly nuts.
Tighten
Tighten the knuckle-to-strut assembly nuts to 100 Nm (74 ft. lbs.).
5. Connect the rear trailing link to the rear knuckle.
6. Connect the rear parallel link to the knuckle.
7. Connect the front parallel link to the knuckle.
8. Connect the parking brake to the knuckle assembly.
9. On vehicles equipped with rear drum brakes, connect the brake line to the knuckle assembly. On vehicles equipped with rear disc brakes, install
the rear brake caliper onto the knuckle assembly.
10. On vehicles equipped with the antilock braking system, install the ABS speed sensor.
11. Install the wheel.
12. Lower the vehicle.
