Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Rear Knuckle: Service and Repair
Disassembly and Reassembly
Disassembly Procedure
1. Remove the knuckle from the vehicle.
2. Remove the brake caliper and brake rotor or the brake drum.
3. Remove the dust cap, the cotter pin, the castellated nut, the lock washer, and the wheel hub.
4. On vehicles equipped with rear drum brakes, remove the rear drum brake assembly. On vehicles equipped with rear disc brakes, remove the rear
disc brake assembly.
5. Remove the brake splash shield.
Assembly Procedure
1. Install the brake splash shield.
2. On vehicles equipped with rear drum brakes, install the rear drum brake assembly. On vehicles equipped with rear disc brakes, install the rear disc
brake assembly.
3. Install the wheel hub, the lock washer, the castellated nut, the cotter pin, and the dust cap.
4. Install the brake caliper and brake rotor or the brake drum.
5. Install the knuckle into the vehicle.