dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine Mount - Squeak/Clunk Noise|Page 1665 > < Engine Mount - Squeak/Clunk Noise
Page 2
background image

Inspect the front engine mount visually for a bare metal spot where the paint has been rubbed off of the left rail bracket (Refer to Figure 2). If the bare
metal spot is present, perform repair procedure 1.

Symptom/Condition 2

The squeak noise during left turns can be caused by the outside of the front engine mount rubbing on the passenger side of the bracket which ties it to the
engine. Inspect the front engine mount visually for a bare metal spot where the paint has been rubbed off of the engine bracket (Refer to Figure 3). If the
bare metal spot is present, perform repair procedure 1.

Symptom/Condition 3

Engine Mount - Squeak/Clunk Noise|Page 1665 > < Engine Mount - Squeak/Clunk Noise