Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
Engine Mount: Service and Repair
Rear Mount
REAR MOUNT REMOVAL
2WD
1. Disconnect the negative cable from the battery.
2. Raise the vehicle on a hoist.
3. Support the transmission with a jack.
4. Remove engine support bracket and insulator thru-bolt (Fig. 52).
5. Raise the transmission and engine slightly.
6. Remove stud nuts attaching insulator to crossmember (Fig. 52). Remove insulator.
4WD
1. Disconnect the negative cable from the battery.
2. Raise the vehicle on a hoist.
3. Support the transmission with a transmission jack.