Durango 4WD V8-5.9L VIN Z (1998)
Fig. 27 Fuel Injector Connectors - Typical
6. Disconnect electrical connectors at all fuel injectors. The factory fuel injection wiring harness is numerically tagged (INJ 1, INJ 2, etc.) for injector
position identification.
Fig. 28 EVAP Canister Purge Solenoid - Typical
7. Remove duty cycle EVAP canister purge solenoid/bracket assembly from intake manifold.
8. Disconnect fuel tube (line) at side of fuel rail.
9. Remove the remaining fuel rail mounting bolts.
10. Gently rock and pull the left fuel rail until the fuel injectors just start to clear the intake manifold. Gently rock and pull the right fuel rail until the
fuel injectors just start to clear the intake manifold. Repeat this procedure (left/right) until all fuel injectors have cleared the intake manifold.
11. Remove fuel rail (with injectors attached) from engine.
