Grand Caravan V6-3.3L VIN R (2005)
HEADLINER MOUNTED
1. Disconnect and isolate the negative battery cable.
Rear A/C - Heater Control - ATC System Shown
2. Using a trim stick C-4755 or equivalent, gently pry the top edge of the control bezel away from the headliner to release the two retaining clips.
3. Remove the rear A/C-heater control and bezel assembly from the headliner and disconnect the wire harness connector(s) from the back of the
control.
Rear A/C - Heater Control Bezel - ATC System Shown
4. If required, remove the three screws that secure the rear A/C-heater control to the bezel and remove the control from the bezel.
INSTALLATION
1. If required, position the rear A/C-heater control onto the rear A/C- heater control housing or bezel (depending on application).
2. Install the three screws that secure the rear A/C-heater control to the housing or bezel. Tighten the screws to 2 N.m (17 in. lbs.).
3. Position the rear A/C-heater control to the headliner or overhead rail (depending on application) and connect the wire harness connector(s) to the
rear of the control.