Grand Caravan V6-3.3L VIN R (2005)
14. Verify vehicle and system operation.
15. Close hood.
Seat Belt & Retractor-First Row-Outboard
REMOVAL
1. Remove first and second row seats.
2. Remove first row seat belt lower anchor bolt.
3. Remove first row seat belt upper turning loop anchor bolt.
4. Remove liftgate sill plate. Remove second seat lower anchor bolt.
5. Remove upper liftgate trim.
6. Remove second seat lower anchor bolt.
7. Remove second seat upper turning loop anchor bolt.
8. Remove D-pillar trim cover.
9. Disconnect speaker connector. The left side has the speaker mounted in the D-pillar trim cover and the right side will have the speaker mounted in
the rear of the quarter trim panel, but the connector is accessible from the rear after the D-pillar trim is removed.
10. Remove quarter trim bolster.
11. Remove quarter trim panel screws.
12. Remove quarter trim panel.
13. Remove first row seat belt and retractor retaining bolt.
14. Remove first row seat belt and retractor from vehicle.
INSTALLATION
1. Install first row seat belt and retractor. Torque bolt to 39 Nm (29 ft. lbs.).
2. Install quarter trim panel.
3. Install quarter trim panel screws.
4. Install quarter trim bolster.
5. Connect speaker connector. The left side has the speaker mounted in the D-pillar trim cover and the right side will have the speaker mounted in the
rear of the quarter trim panel, but the connector is accessible from the rear after the D-pillar trim is removed.
6. Install D-pillar trim cover.
7. Install second seat belt lower anchor bolt. Torque bolt to 39 Nm (29 ft. lbs.).
8. Install second seat belt upper turning loop anchor bolt. Torque bolt to 39 Nm (29 ft. lbs.).
9. Install upper liftgate trim.
10. Install liftgate sill plate.
11. Install first row seat belt upper turning loop anchor bolt. Torque bolt to 39 Nm (29 ft. lbs.).
12. Install first row seat belt lower anchor bolt. Torque bolt to 39 Nm (29 ft. lbs.).
13. Install first and second row seats.
