RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
11. Using snap ring pliers (Special Tool C-4574 or equivalent) (2), remove the snap ring that secures the clutch field coil (1) and remove the field coil.
INSTALLATION
CAUTION: The snap ring must be fully and properly seated in the groove or it will vibrate out, resulting in a clutch failure and severe damage to the
A/C compressor.
NOTE: A new snap ring must be used to secure the clutch field coil to the A/C compressor. The bevel side of the snap ring must face outward and both
snap ring eyelets must be oriented to the right or to the left of the clutch field coil dowel pin location on the A/C compressor.
1. Install the clutch field coil (1) and using snap ring pliers (Special Tool C-4574 or equivalent) (2), install the snap ring that secures the field coil to
the front of the A/C compressor. Be certain that the snap ring is fully and properly seated in the groove.
2. Install the retainer and screw (3) over the wire harness lead (2) of the clutch field coil (1) and onto the A/C compressor. Tighten the screw to 2.2