RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
1. Install the grab handle (1) onto the B-pillar and install the two bolts (3). Tighten the bolts to 6 N.m (55 in.lbs.).
2. Close the two fastener covers (2) located on the grab handle.
B-Pillar Lower Trim
B-PILLAR LOWER TRIM
REMOVAL
REGULAR CAB
1. Remove the cowl trim panel, Refer to Trim Panel.
2. Remove the upper B-pillar trim panel, Refer to Trim Panel.
3. Remove the bolt (2) that secures the seat belt (1) to the bottom of the B-pillar (4) and position the seat belt out of the way.
4. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the lower B-pillar trim panel (3) to the B-pillar.
5. Remove the seat belt from the lower B-pillar trim panel through the slot provided and remove the trim panel.
QUAD CAB