RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
1. Remove the cowl trim panel, Refer to Trim Panel.
2. Remove the rear door sill trim cover, Refer to Trim Panel.
3. Remove the upper B-pillar trim panel, Refer to Trim Panel.
4. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the lower B-pillar trim panel (1) to the B-pillar (2).
5. Remove the seat belt (3) from the lower B-pillar trim panel through the slot provided and remove the trim panel.
INSTALLATION
REGULAR CAB
1. Route the seat belt (1) through the slot in the lower B-pillar trim panel (3) and position the trim panel to the B-pillar (4).
2. Engage the retaining tabs that secure the lower B-pillar trim panel to the B-pillar.
3. Install the bolt (2) that secures the seat belt to the bottom of the B-pillar. Tighten the bolt to 40 N.m (30 ft.lbs.).
4. Install the upper B-pillar trim panel.
5. Install the cowl trim panel.
QUAD CAB
