RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
![background image](/dodge/ram_3500_hd_2wd/l6-6.7l_dsl_turbo_vin_a/Page-3096004.png)
3. Using a trim stick C-4755 or equivalent (1), disengage the retaining tabs that secure the rear air outlets (2) to the rear air outlet housing (3) and
gently pry the outlets from the housing (3).
Installation-Front Passenger Air Outlet
INSTALLATION-FRONT PASSENGER AIR OUTLET
1. Position the passenger side instrument panel air outlet and demister air outlet assembly (2) onto the back of the instrument panel cover (3).
CAUTION: Always use the retaining screws supplied with the replacement air outlet. Do not use screws longer then 10 mm. Failure to
follow this caution may result in damage to the instrument panel cover.
CAUTION: Use care when installing the air outlet retaining screws. To prevent damage to the instrument panel cover, do not
overtighten the screws.
2. Install six M 4.2 x 9.5 mm screws (1) to secure the air outlet assembly to the instrument panel cover. Carefully tighten the screws securely.
3. Install the instrument panel cover.
4. Install the instrument panel.
Installation-Rear Seat Air Outlets
INSTALLATION-REAR SEAT AIR OUTLETS
NOTE: The air outlets are retained into the air outlet housing by eight retaining tabs. The air outlets must be first installed onto the bottom set of
retaining tabs, then the upper set of tabs can be engaged.