Stratus Coupe V6-3.0L VIN H (2001)
2. Measure the voltage between terminal 1 and ground by backprobing.
Q: Is the voltage approximately 12 volts (battery positive voltage)?
YES: Go to Step 8.
NO: Go to Step 3.
STEP 3. Check the column switch connector C-203 for damage.
Q: Is column switch connector C-203 in good condition?
YES: Go to Step 4.
NO: Repair or replace it. Refer to Harness Connector Inspection. Confirm the DTC 12 is not displayed.
STEP 4. Check the harness wires between column switch connector C-203 and battery.
NOTE: After checking joint connectors C-141 and intermeditate connector C-209, check the wires. If joint connector C-141 and intermediate connector