Stratus Coupe V6-3.0L VIN H (2001)
C-209 are damaged, repair or replace them. Refer to Harness Connector Inspection.
Q: Are the harness wires between column switch connector C-203 and battery in good condition?
YES: There is no action to be taken.
NO: Repair them. Confirm the DTC 12 is not displayed.
STEP 5. Check the column switch ground circuit at the column switch connector C-203.
1. Disconnect the column switch connector C-203 and measure at the harness side.
2. Measure the resistance between terminal 4 and ground.
Q: Is the resistance less than 2 ohm?
YES: Go to Step 8.
NO: Go to Step 6.
STEP 6. Check column switch connector C-203 for damage.
Q: Is column switch connector C-203 in good condition?
YES: Go to Step 7.
NO: Repair or replace it. Refer to Harness Connector Inspection. Confirm the DTC 12 is not displayed.