Stratus Coupe V6-3.0L VIN H (2001)
STEP 7. Check the harness wires between column switch connector D-203 and ground.
NOTE: After checking junction block connectors C-310 and C301, check the wires. If junction block connectors C-310 and C301 are damaged, repair
or replace them. Refer to Harness Connector Inspection.
Q: Are the harness wires between column switch connector C-203 and ground in good condition?
YES: There is no action to be taken.
NO: Repair them. Confirm the DTC 12 is not displayed.
STEP 8. Check the column switch connector C-203 and ETACS-ECU connector C-313 for damage.
Q: Are column switch connector C-203 and ETACS-ECU connector C-313 in good condition?
YES: Go to Step 9.
NO: Repair or replace them. Refer to Harness Connector Inspection. Confirm the DTC 12 is not displayed.