Stratus Coupe V6-3.0L VIN H (2001)
STEP 9. Check front-ECU connector A-09X for damage.
Q: Is front-ECU connector A-09X in good condition?
YES: Go to Step 10.
NO: Repair or replace it. Refer to Harness Connector Inspection. The windshield wiper should work normally.
STEP 10. Check the harness wires between front-ECU connector A-09X and ignition switch (ACC).
NOTE: After checking intermediate connector C-209 and junction block connectors C-303 and C-301, check the wires. If intermeditate connector
C-209 and junction block connectors C-303 and C-301 are damaged, repair or replace them. Refer to Harness Connector Inspection.
Q: Are the harness wires between front-ECU connector A-09X and ignition switch (ACC) in good condition?
YES: There is no action to be taken.
NO: Repair them. The windshield wiper should work normally.
Inspection Procedure G-2
