dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 1962 > < Component Tests and General Diagnostics|Page 1960
Page 115
background image

STEP 10. Check combination meter connector C-102 and ETACS-ECU connector C-313 for damage.

Q: Are combination meter connector C-102 and ETACS-ECU connector C-313 in good condition?

YES: Go to Step 11.
NO: Repair or replace them. Refer to Harness Connector Inspection. The seat belt warning light should work normally.

STEP 11. Check the harness wire between combination meter connector C-102 and ETACS-ECU connector C-313.

Q: Is the harness wire between combination meter connector C-102 and ETACS-ECU connector C-313 in good condition?

YES: There is no action to be taken.
NO: Repair it. The seat belt warning light should work normally.

Inspection Procedure I-1

Door ajar warning light: Door ajar warning light does not work normally.

Component Tests and General Diagnostics|Page 1962 > < Component Tests and General Diagnostics|Page 1960