Stratus Coupe V6-3.0L VIN H (2001)
![background image](/dodge/stratus_coupe/v6-3.0l_vin_h/Page-522114.png)
STEP 8. Check combination meter connector C-101 for damage.
Q: Is combination meter connector C-101 in good condition?
YES: Go to Step 9.
NO: Repair or replace it. Refer to Harness Connector Inspection. The seat belt warning light should work normally.
STEP 9. Check the harness wires between combination meter connector C-101 and ignition switch (IG1).
NOTE: After checking junction block connectors C-308 and C-301, check the wires. If junction block connectors C-308 and C-301 are damaged, repair
or replace them. Refer to Harness Connector Inspection.
Q: Are the harness wires between combination meter connector C-101 and ignition switch (IG1) in good condition?
YES: There is no action to be taken.
NO: Repair or replace them. The seat belt warning light should work normally.