Stratus Coupe V6-3.0L VIN H (2001)
YES: Go to Step 2 <when using scan tool MB991502> or 3 <when using a voltmeter>.
NO: Solve the problem first.
STEP 2. Check the input signal (by using scan tool MB991502).
Check the input signals from the fog light switch.
CAUTION: To prevent damage to scan tool MB991502, always turn the ignition switch to the "LOCK" (OFF) position before connecting or
disconnecting scan tool MB991502.
1. Connect scan tool MB991502 to the data link connector.
2. Check that the tone alarm of scan tool MB991502 sounds when the input signal enters.
Q: Does the tone alarm of scan tool MB991502 sound when the input signal enters?
YES: Go to Step 4.
NO: Check the fog light input signal circuit. Refer to Inspection Procedure O-5.
STEP 3. Check the input signal (by using a voltmeter).
Check the input signals from the fog light switch.
1. Use special tool MB991529 to connect a voltmeter between ground terminal 4 or 5 and ETACS-ECU terminal 9 of the data link connector.
2. Check that the voltmeter indicator deflects once when the input signal enters.
Q: Does the voltmeter indicator deflect?
YES: Go to Step 4.
NO: Check the fog light input signal circuit. Refer to Inspection Procedure O-5.