Stratus Coupe V6-3.0L VIN H (2001)
STEP 5. Check fog light switch connector C-139 and ETACS-ECU connector C-313 for damage.
Q: Are fog light switch connector C-139 and ETACS-ECU connector C-313 in good condition?
YES: Go to Step 6.
NO: Repair or replace them. Refer to Harness Connector Inspection. The fog light switch input signal should be able to be checked and the fog lights
should work normally.
STEP 6. Check the harness wire between fog light switch connector C-139 and ETACS-ECU connector C-313.
Q: Is the harness wire between fog light switch connector C-139 and ETACS-ECU connector C-313 in good condition?
YES: Replace the ETACS-ECU. The fog light switch input signal should be able to be checked and the fog lights should work normally.
NO: Repair it. The fog light switch input signal should be able to be checked and the fog lights should work normally.
Inspection Procedure O-6
The washer fluid level switch signal is not sent to the ETACS-ECU.