Alignment: Specifications
- Make
- Dodge
- Model
- Stratus Sedan
- Engine
- V6-2.7L
- Year
- 2001
- Section
- Alignment › Specifications
Alignment: Specifications
Front Wheel Alignment
Camber
Preferred
+0.1 deg
Acceptable
-0.5 to +0.7 deg
Cros Camber
Preferred
0.0 deg
Acceptable
0.7 deg
Caster
Preferred
+3.1 deg
Acceptable
+2.1 to +4.1 deg
Cross Caster
Preferred
0.0 deg
Acceptable
1.0 deg
Toe (Right or Left) Preferred
+0.05 deg
Acceptable
-0.05 to +0.15 deg
Total Toe
Preferred
+0.1 deg
Acceptable
-0.1 to +0.3 deg
Curb Height
28.0 +/- 0.75 in
Rear Wheel Alignment
Camber
Preferred
-0.1 deg
Acceptable
-0.5 to +0.3 deg
Toe (Right or Left) Preferred
+0.05 deg
Acceptable
-0.05 to +0.15 deg
Total Toe
Preferred
+0.1 deg
Acceptable
-0.1 to +0.3 deg
Thrust Angle
Preferred
0.0 deg
Acceptable
0.0 +/- 0.15 deg
Curb Height
28.0 +/- 0.75 in
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2001 Dodge Stratus 2.7L
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Dodge power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.