Electrical equipment: electronic injection-ignition

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Electrical equipment › Electrical equipment: electronic injection-ignition

00 Introduction and technical dataElectrical equipment: electronic injection-ignition

Electrical equipment: electronic injection-ignition

F1
INTEGRATED ELECTRONIC INJECTION-IGNITION SYSTEM

Type	HITACHI MFI-O
Firing order	1 – 3 – 4 – 2

IGNITION COIL (1 FOR SPARK PLUG)

F2

Type	HITACHI
Code	GE 212331
Ohmic resistance of primary winding at 20°C Ω	0.495 - 0.605
Ohmic resistance of secondary winding at 20°C Ω	-

RPM AND TOP DEAD CENTRE SENSOR

F3

Make and type	HITACHI GE 108101
Sensor winding resistance Ω	513 - 627
Distance (gap) between sensor and crankshaft pulley tooth mm	0.4 - 1.2

KNOCK SENSOR

Make and type	NGK KUE-03

TIMING AND CYLINDER RECOGNITION SENSOR

Make and type	Bosch B 232.070.023

ADVANCE ON ENGINE

With engine idling (850±50/min)	10° ± 5°

SPARK PLUGS

F4

Make and type	NGK BKR6EKC Champion RC7BMC Golden Lodge 2HLDR
Thread	M 14×1.25
Electrode gap mm	0.8

01 General