Description (page 2 of 2)
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Engine (98 range)
00 Introduction and technical dataDescription · page 2 of 2
16v |
20v STEP A |
|
|---|---|---|
| Values in mm | ||
| Engine lubrication system | forced circulation, via lobe gear pump with cartridge filter in line |
forced circulation, via gear pump with in-line cartridge oil filter |
| Oil pump | lobe gear | gear, located in the front crankshaft cover |
| Pump operated | via crankshaft | via chain driven by the crankshaft |
| Oil pressure relief valve | incorporated in crankshaft front cover | |
| Full flow filter | - | cartridge |
| Insufficient oil pressure sender unit | - | electrical |
| between pump housing and driven gear | 0.100 - 0.210 | - |
| between gear edges and pump case | - | 0.110 - 0.180 |
| between gear edges and pump cover | 0.025 - 0.070 | - |
| - | 0.016 - 0.086 | |
| Full flow filter | cartridge | |
| Insufficient oil pressure sender unit | electrical | |
| between drive and driven gears | 0.30 | |
| when idling | 1 bar | |
| at 4000 rpm | 4 bar | |
| P1 | 11.73 - 12.51 | |
| Oil pressure relief valve spring H1 | 35 | |
Parts & tools for this job For 1995 Fiat Bravo
- PARTEngine gasket setSearch: Fiat Bravo 1995 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.