Engine (98 range) (page 3 of 3)
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Engine (98 range)
00 Introduction and technical dataEngine (98 range) · page 3 of 3
| Type of check or adjustment | Op. N° | Adjust. lever pos. | Rotation speed rpm | Av. cap. per cyl. mm³/cycle | Advance α° | Max. discr. btwn flow rates mm³/cycle | Ops. or checks to be carried out |
|---|---|---|---|---|---|---|---|
| Max capacity check | 13 | Max | 750 | 55,0±3 | 0 | – | Supercharging pressure 1 bar |
| Max capacity check | 14 | Max | 450 | 35,0±4 | 0 | – | Supercharging pressure 0 bar |
| Max capacity check | 15 | Max | 100 | 42,0±8 | 0 | – | Supercharging pressure 0 bar |
| Idle setting | 16 | Min | 450 | 6,5±2 | 0 | 4 | Pull the specific levers |
| Idle check when cold | 17 | Min | 450 | 12,0±2 | 0 | 4 | Release the specific levers |
| Regulator state | 18 | Min | 400 | (Q16+9)±4 | 0 | 4 | Lever drawn |
| Anti-stall capacity | 19 | Min | 450 | 4,5±1,3 | 0 | 4 | Pull the STOP lever |
| Recirculation flow rate | 20 | Max | 2100 | 10÷40 l/h | 0 | – | Supercharging pressure 1 bar |
| Supply stop | 21 | Max | 400 | ≤3,0 | 0 | – | Remove the supply to the electrostop |
Parts & tools for this job For 1995 Fiat Bravo
- PARTEngine gasket setSearch: Fiat Bravo 1995 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.