Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)01 · 00 Introduction and technical data
01 · General

Planned maintenance operations

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Tightening torques › Planned maintenance operations
00 Introduction and technical dataPlanned maintenance operations

PLANNED MAINTENANCE OPERATIONS

INTERVALS IN
THOUSANDS OF KM
20 40 60 80 100
Replace spark plugs, check high tension leads ☆ ☆
Replace brake fluid ☆
Check injection/ignition system (petrol engines, using autodiagnostic socket) ☆ ☆
Change engine oil and oil filter (every 10,000 Km for diesel engines) ☆ ☆ ☆ ☆ ☆

Additional operations

In addition to what is laid down in the "Planned maintenace" programme, the following checks should also be carried out:

Every 500 km or before long journies check - engine oil level
- engine coolant level
- brake fluid level/hydraulic clutch operation
- power steering fluid level
- pressure and condition of tyres
- windscreen washer fluid level
Every 500 km check (only for diesel engines) - bleed condesnation water from fuel filter
Replace every 2 years - engine coolant
- brake/clutch fluid
Replace every 120,000 km - timing belt

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.