00 Introduction and technical data (Rear suspension): Tightening torques
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Tightening torques › Rear suspension
00 Introduction and technical dataRear suspension · page 1 of 2
| DESCRIPTION | Thread size | Tightening torques daNm |
|---|---|---|
| Ends of anti-roll bar to connecting rod fixing, nut | M10×1,25 | 7 |
| Connecting rod to front suspension arm fixing, nut | M10×1,25 | 3,1 |
| Front wheel hub to joint fixing, nut | M22×1,5 | 24 |
| M24×1,5 | 28 | |
| Wheel bolts/nuts | M12×1,25 | 8,6 |
REAR SUSPENSION
| Front flexible mounting to rear frame and bodyshell fixing, bolt with wide flange | M12×1,25 | 10,8 |
| Rear flexible mounting to bodyshell fixing, bolt with wide flange | M12×1,25 | 10,8 |
| Rear suspension track control arm to frame fixing, nut for bolt | M16×1,5 | 15 |
| Lower shock absorber to suspension fixing, nut for bolt | M12×1,25 | 8,8 |
| Upper shock absorber to mounting fixing, bolt | M10×1,25 | 6 |
| Rear hub stub axle fixing, nut | M22×1,5 | 28 |
| Anti-roll bar to rear suspension arm fixing, bolt | M10×1,25 | 5,6 |
| U bolts supporting anti-roll bar to rear suspension arm fixing, bolt | M8 | 2,8 |
| Wheel bolts/nuts | M12×1,25 | 8,6 |
| Lever to track control arm fixing, nut for bolt | M8 | 1,5 |
Parts & tools for this job For 1995 Fiat Bravo
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTRear shock absorbersSearch: Fiat Bravo 1995 rear shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.