Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Replacing auxiliary shaft belt (98 range, 1242 16v) › Refitting
10 EngineRefitting
Diagram showing the location of bolts on the power steering pump assembly
Diagram showing a hand using tool 1895762000 to check belt tension on a pulley

  1. Remove the shield for the power steering pump pulley, then remove the drive belt.

Refitting

  1. Tension the powr assisted steering drive belt acting on the bolts securing the pump mounting bracket. Using tool 1895762000, check that the tension of the new belt is between 36 and 45 daN. If the same belt is refitted, the tension should be between 23 and 30 daN.
Diagram showing the alternator and associated drive belts with arrows pointing to mounting bolts

Alternator drive belt

  1. After having removed the shield for the auxiliary drive belts, remove the protective cover for the alternator pulley.
  2. Loosen the tension of the alternator drive belt acting on the bolts shown in the diagram and the rear bolt fixing it to the alternator bracket.
Diagram showing the alternator bracket with arrows indicating the position of the tensioning and fixing bolts

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.