Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Replacing timing belt (1910 TD 100) › Refitting
10 EngineRefitting · page 1 of 2
Diagram showing the timing belt and associated pulleys on the engine front
Diagram showing a hand adjusting the timing belt tensioner with a tool

Refitting

  1. Fit the new belt as shown in the figure.

Prevent the belt coming into contact with oil or solvents which could affect the elasticity of the rubber with consequent loss in grip.

  1. Return the tensioning device to the position shown in the figure. The preloaded tensioner spring will ensure the belt is correctly tensioned after the crankshaft has been turned a few times.

REMOVING TIMING BELT

Before removing the timing belt, the auxiliary belt must be removed as described previously.

  1. Remove the lower power unit guard.
  2. Remove the gearbox guard by unscrewing the retaining bolts shown and position flywheel retainer 1860898000 to secure the flywheel in position.
Diagram showing the removal of the lower power unit guard from underneath the vehicle
Diagram showing the removal of the gearbox guard and the installation of flywheel retainer 1860898000

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.