Transmission of motion
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Components and operation (Automatic) › Transmission of motion
TRANSMISSION OF MOTION
The diagram below illustrates in a simplified manner the composition of the gear sets and control components (clutches, brakes and free wheels) of the gearbox.
The same wiring diagram will be used on the following pages to illustrate the intervention of the various control components during the different stages of operation.
- B1. Band brake
- B2. Multiple disc brake
- C0. Multiple disc clutch
- C1. Multiple disc clutch
- C2. Multiple disc clutch
- C3. Multiple disc clutch
- D. Clutch carrier drum
- E. Motion input shaft
- F0. Free wheel
- F1. Free wheel
- I1. Main shaft motion output gear
- I2. Layshaft gear
- K1. Crownwheel - epicyclic gear set P1
- K2. Crownwheel - epicyclic gear set P2
- S1. Sun gear - epicyclic gear set P1
- S2. Sun gear - epicyclic gear set P2
- ST1. Planet gear for epicyclic gear set P1
- ST2. Inner planet gear for epicyclic gear set P2
- ST3. Outer planet gear for epicyclic gear set P2
- T1. P1 and P2 epicyclic gear train carrier
- U. Relay shaft
The table below gives the conditions of activation of the components depending on the gear engaged and the position of the selector lever.
| Selector lever position |
Gear engaged | Control solenoids | Clutches | Brakes | Free wheels | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| S1 | S2 | SL | C1 | C2 | C3 | C0 | B1 | B2 | F1 | F0 | ||
| P | Park | ◦ | ◦ | |||||||||
| R | Reverse (*) | ◦ | ◦ | ◦ | ◦ | |||||||
| Neutral (**) | ◦ | ◦ | ◦ | |||||||||
| N | Neutral | ◦ | ◦ | |||||||||
| D | 1st | ◦ | ◦ | ◦ | ◦ | ◦ | ||||||
| 2nd | ◦ | ◦ | ◦ | ◦ | ◦ | ◦ | ||||||
| 3rd | ◦ | ◦ | ◦ | ◦ | ◦ | ◦ | ||||||
| 4th | ◦ | ◦ | ◦ | ◦ | ||||||||
| 3 | 1st | ◦ | ◦ | ◦ | ◦ | ◦ | ||||||
| 2nd | ◦ | ◦ | ◦ | ◦ | ◦ | ◦ | ||||||
| 3rd | ◦ | ◦ | ◦ | ◦ | ◦ | ◦ | ||||||
| 2 | 1st | ◦ | ◦ | ◦ | ◦ | ◦ | ||||||
| 2nd | ◦ | ◦ | ◦ | ◦ | ◦ | ◦ | ||||||
| 3rd | ◦ | ◦ | ◦ | ◦ | ◦ | ◦ | ||||||
| 1 | (1st)● | ◦ | ◦ | ◦ | ◦ | ◦ | ◦ | |||||
| (2nd)● | ◦ | ◦ | ◦ | ◦ | ◦ | ◦ | ||||||
NOTE ◦=Solenoid activated (*) Speed ≤7km/h (**) Speed > 7km/h (●) Intermediate selection in manual scale.
Parts & tools for this job For 1995 Fiat Bravo
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Bravo
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.