Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Removing - refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Drive shafts (1370 12v) › Removing - refitting
21 Gearbox and differentialRemoving - refitting
Diagram showing a hand using a hammer and chisel to relieve staking on a hub nut
Diagram showing a long tool being used to loosen or tighten a component near the wheel hub
Diagram showing a tie-rod end being disconnected with tool 1847038000

REMOVING - REFITTING

Place the car on ramps, disconnect the battery's negative terminal, remove the front wheels and then proceed as follows:

  1. Using a hammer and chisel, relieve the staking on the hub nut.
  2. Unscrew the hub nut.
  3. Undo the bolt on the tie-rod end then use tool 1847038000 to disconnect the tie-rod.
  4. Undo the bolts securing the vertical link to the damper, and angle the vertical link to release the shaft.
Diagram showing the vertical link being angled away from the damper to release the shaft

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.