Removing-refitting

REMOVING-REFITTING

Position the vehicle on a lift, and proceed with the removal of the external controls as described below.

1. Disconnect the negative battery lead, remove the protective cover for the positive pole, disconnect the terminal and separate the latter from the starter motor supply leads; undo the nut securing the battery to the drip tray, then remove the latter from the engine compartment.
2. Remove the gear lever cover from the vehicle interior.
3. Remove the handbrake protective boot, then disconnect the electrical connection underneath.
4. Undo the bolt securing the relay casing cover and remove it, then undo the nuts fixing the casing to the battery drip tray and place the casing at the side.