Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Paa0zb bos

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
External controls (98 range) › Paa0zb bos
21 Gearbox and differentialPaa0zb bos · page 1 of 2

PAA0ZB BOS

Diagram showing the location of the battery drip tray in the engine compartment
Diagram showing the end of the gear engagement cable being disconnected from the mounting bracket
Diagram showing the end of the gear selector cable being disconnected, with icons indicating up and down movement
  1. Remove the battery drip tray undo the bolts fixing it to the bodyshell.
  2. Disconnect the end of the gear engagement cable and undo the bolts fixing it to the mounting bracket.
  3. Disconnect the end of the gear selector cable, then move the gear selector and engagement cable assembly to the side of the engine compartment.
  4. Raise the vehicle and disconnect the handbrake cables from the support and release them from the bracket.
  5. After having disconnected the electrical connection for the Lambda sensor, undo the bolts fixing the exhaust pipe to the manifold.
Two diagrams: top shows handbrake cables being released from a bracket; bottom shows the exhaust pipe connection to the manifold
Diagram showing the Lambda sensor electrical connector and the bolts fixing the exhaust pipe to the manifold

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.