04 · Transmission

Paa0zb bos (page 2 of 2)

Make: Fiat
Model: Bravo /Brava (182) Factory Service Manual
Year: 1995–2001
Section: External controls (98 range)

‹ Prev Paa0zb bos Next › Dismantling at the bench

21 Gearbox and differentialPaa0zb bos · page 2 of 2

Diagram showing the connection between the exhaust pipe and catalytic converter with arrows indicating removal direction

Diagram showing the rubber mounting for the exhaust pipe

Diagram showing the front mounting bracket of the exhaust pipe

1. Undo the nuts fixing the first section of the exhaust pipe to the catalytic converter, then remove the pipe. 2. Release the exhaust pipe from the rubber mounting shown in the diagram. 3. Undo the bolt fixing the exhaust pipe front mounting bracket. 4. Undo the bolt fixing the exhaust pipe rear mounting bracket, then extract it from the vehicle. 5. Remove the heat shield acting on the fixings illustrated.

Diagram showing the rear mounting bracket of the exhaust pipe

Diagram showing the heat shield acting on the fixings

‹ Prev Paa0zb bos Next › Dismantling at the bench

Parts & tools for this job For 1995 Fiat Bravo

TOOLTorque wrenchSearch: 3/8 inch torque wrench
TOOLSocket setSearch: socket set metric
BOOKHaynes manualSearch: Haynes manual Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.