Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Removing - refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1747 16v) › Removing - refitting
21 Gearbox and differentialRemoving - refitting · page 1 of 2

Removing - refitting

21-27.

View of the relay box secured to the battery cage in the engine compartment
Close-up view of the wiring connections at the battery's positive terminal
Battery cage with numbered callouts (1) for screws and (2) for a bolt securing it to the bodywork, alongside up/down arrow icons
  1. Undo the bolts securing the relay box to the battery cage, then move it over to one side.
  2. Disconnect the cables indicated from the wiring on the battery’s positive terminal.
  3. Remove the screws (1) and slacken the bolt (2) securing the battery cage to the bodywork. Before removing the cage, disconnect the cable clip underneath.
  4. Disconnect the clutch cable by undoing the nut (1) and locknut (2) shown in the figure. Also disconnect the earth cable (3) from the gearbox and the electrical connector for the reversing lights switch (4).
  5. Disconnect the reaction link.
Gearbox area showing numbered callouts (1) through (4) identifying the clutch cable nuts, earth cable, and reversing light switch connector
Reaction link connection point between the gearbox and the transmission assembly

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.