Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)07 · 44 Suspension and wheels
07 · Steering & suspension

Wishbone and steering subframe

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Front suspension › Wishbone and steering subframe
44 Suspension and wheelsWishbone and steering subframe · page 1 of 2
Diagram showing the front suspension area with callout number 1
Diagram showing the steering subframe area with callout number 2
Diagram of a vertical link component
Diagram showing the underside of the engine and subframe assembly

WISHBONE AND STEERING SUBFRAME

Removal

To remove the wishbone and the steering subframe, place the car on ramps, remove the front wheels and the front section of the exhaust pipe, then carry out the following operations:

  1. undo the bolt securing the wishbone balljoint to the vertical link;
  2. undo the two nuts securing the anti-roll bar link and remove the link;
  3. undo the bolts securing the wishbone to the steering subframe and remove the wishbone;
Diagram showing the wishbone mounting bolts on the subframe
Diagram of the removed wishbone component

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.