Front wheel geometry (page 2 of 2)

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Wheel geometry

44 Suspension and wheelsFront wheel geometry · page 2 of 2

The wheel geometry must be checked after the following checks have been carried out:

• - tyre pressures;
• - the eccentricity and out-of-true of the wheel rims must not exceed 3 mm;
• - wheel bearing endfloat.

TOE-IN (non adjustable)

See data in Sec. 00

CAMBER (non adjustable)

If the rear wheel angles are not as specified, they cannot be adjusted as the rear suspension comprises a rigid torsion beam.

07 Steering & suspension