Manual air conditioner (page 2 of 2)

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Manual air conditioner

50 Auxiliary unitsManual air conditioner · page 2 of 2

• undo the screws shown by the arrows in the top figures, which secure the bottom half-casing to the heater-distributor unit;

• remove the diaphragm (1) conveying air to the fan, which is press fitted by the lugs (2) inserted in the holes (3) on the inside of the top half-casing (4);
• release the rod (5) connected to the electrical actuator (6) from the clip shown by the arrow, which secures it to the lever (7) for positioning the air intake flap (8);
• working through the small slot (9) in the spindle of the air intake flap (8), release the end of the lever (7), which can thus be withdrawn from the top half-casing (4);

• release the air intake flap (8) from the top half-casing of the duct (4), bearing in mind that its spindle is press fitted by means of the lugs (10);
• dismantle the heater-distributor unit following the procedure described and illustrated on pages 49 and following.

08 General