Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)09 · 55 Electrical system
09 · Electrical

Air bag

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Air bag › Air bag
55 Electrical systemAir bag
Diagram showing the glove compartment area with arrows indicating bolts to be unscrewed
  1. Unscrew the bolts fastening the glove compartment and remove from the car.
  2. Disconnect supply connector leading from the control unit.
  3. Unscrew the bolts fastening the air bag to the body.
  4. Remove the air bag from the car.

Following removal, unactivated air bag modules should immediately be placed in a specially marked cabinet and locked away. The module should be placed with the metal part resting on the surface as shown in the figure.

NOTE Refit the air bag by carrying out removal instructions in reverse order.

NEVER CONNECT THE BATTERY UNTIL INSTALLATION IS COMPLETE

Illustrates removal of bolts securing door hinge assembly
Diagram showing the air bag mounting area with an arrow pointing to the supply connector

NOTE After refitting, check system operation by means of a FIAT/ LANCIA TESTER or other diagnostic instrument.

Diagram showing the air bag bolts being removed from the body structure
Diagram showing an air bag module placed flat on a surface with the metal part resting down
Illustrates air conditioning compressor with mounting bracket

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.