Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)10 · 70 Bodywork
10 · Body & interior

Removing-refitting rear seat belts

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Interior fittings › Removing-refitting rear seat belts
70 BodyworkRemoving-refitting rear seat belts
Diagram showing the lower fixing cover and bolt on the rear seat cushion area
Diagram showing the upper fixing bolt for the rear seat belt on the rear pillar

REMOVING-REFITTING REAR SEAT BELTS

The procedure is carried out on the 5 door version; as far as the 3 door version is concerned, the procedure is the same.

  1. Fold over the rear seat cushion and remove the fixing cover shown, then undo the lower bolt fixing the belt.
  2. Remove the fixing cover and undo the upper bolt fixing the belt.
  3. Remove the speaker griller, acting on the appropriate retaining tabs.
  4. Move the luggage compartment inner lining aside, then undo the bolt fixing the reel.
  5. Remove the belt through the slot in the rear pillar cover, then remove the belt complete with reel.
Diagram showing the removal of the speaker griller from the rear pillar to access the seat belt reel
Diagram showing the seat belt reel exposed after removing the speaker griller and inner lining
Diagram showing the seat belt being removed through the slot in the rear pillar cover

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.